Hedensted Gruppen HG Combi Cut, Руководство пользователя

Страница: 9 / 55

Telephone 0045 75891244
- for professionel farmes
9
5.2 Connection of extra equipment.
The HG Combi Cut is fit with a 16A CEE socket with 3x400V. The socket
is switched on and off on the main switch on the operation panel of the
slicing machine. Extra equipment, such as HG Grid conveyor or HG
Transport belt, which has to run at the same time as the slicing machine,
can with advantage be connected to the socket.
5.3 Relocation
Before moving the machine you have to disconnect the air- and electricity
connection. Pay attention, the moveable parts of the machine can change
position, when the machine vents.
Mount the transport fittings on the legs of the machine, and move it with a
palletizer. Pay attention that the cables and the tubes of the machine are
not squeezed.
Warning:
Do not lift the machine in the moveable tower.
Notice that the weight of the machine is 300 kg.
By setup on a new location repeat the procedure, which is described
under section 5.