Hedensted Gruppen HG Combi Cut, Руководство пользователя

Страница: 17 / 55

Telephone 0045 75891244
- for professionel farmes
17
8. Starting up the HG Combi Cut
The below procedure is made without mink.
1. Connect Electricity 0+PE
2. Connect air Min. 7 bar
Warning: The moveable parts will react quickly an run to starting
position.
3. Check input pressure (7 bar) - Page 11, point 11
4. Adjust the input pressure (7 bar) - Page 11, point 11
5. Emergency stop has to be disengaged - Page 10, point 1
6. Press the button Reset Emergency stop – page 10, point. 7
7. Press the button Reset - Page 10, point 3
8. Press the foot pedal - Page 10, point 9
Warning: Now the machine will run a cycle.
8. Watch the stretch pressure - Page 11, point 6 (min. 1 bar - max. 4
bar)
9. After running a cycle the machine returns to starting position.
9.1 You can adjust the stretch pressure (page 11, point 10)
9.2 Adjust other things in program.
10. Repeat this procedure point. 7 to 9, until the machine has the
wanted pressure.
Warning: Only adjust the machine when it does not run, or you risk
to get squeezed between the moveable parts of the
machine.
When you adjust the machine, do not activate the foot
pedal.