If the output of your amplifier is significantly higher than the rated power handling capacity of your speakers
extremely high volumes can physically destroy your speakers. This doesn’t actually happen often but you
should be aware that it is possible.
Weak amplifiers with low output ratings can actually be more dangerous for your speakers at medium
volumes because weak amplifiers may overload much faster than powerful ones and this causes
measurable and audible distortion, which is extremely dangerous to your loudspeakers.
Always turn the volume down immediately as soon as you hear distortion! If you like listening to loud music
make sure that your amplifier can deliver at least as much power as the speakers’ power-handling rating.
THE SOUND YOU CAN’T HEAR...
Amplifiers, tuners and CD players can all produce inaudible high-frequency signals – and this doesn’t only
apply to cheap products. If your tweeters fail at low or medium volumes you should have a qualified
technician check your system components for dangerous inaudible signals.
SPECIFICATIONS
Metas XT 701
Metas XT 501
Configuration:
3-way bass reflex
2 1/2-way bass reflex
Power-handling capacity:
180 / 300 W
160 / 280 W
Impedance:
4 – 8 ohms
4 – 8 ohms
Frequency response:
25 – 42 000 Hz
26 – 42 000 Hz
Recommended amplifier output:
30 – 300 W
30 – 280 W
Efficiency (1W/1m):
91 dB
91 dB
Dimensions (WxHxD):
200 x 1080 x 310 mm
200 x 990 x 310 mm
Accessory:
metal spikes
metal spikes
Metas XT 301
Metas XT Center 31
Configuration:
2-way bass reflex
2-way bass reflex
Power-handling capacity:
90 / 150 W
100 / 160 W
Impedance:
4 – 8 ohms
4 – 8 ohms
Frequency response:
32 – 42 000 Hz
34 – 42 000 Hz
Recommended amplifier output:
30 – 150 W
30 – 160 W
Efficiency (1W/1m):
90 dB
90 dB
Dimensions (WxHxD):
200 x 355 x 290 mm
460 x 180 x 275 mm
SUBJECT TO TECHNICAL CHANGE.
GB
GB
8