Heatmor 400-4S, Руководство пользователя

Страница: 79 / 95

74
Flue plugged. Clean Flue.
Refer to
“Top Rectangular Flue.”
Ashes in Air Box. Clean Air Box.
Refer to
“Air Box.”
Too many ashes in
Furnace.
Clean out ashes.
Refer to
“Ash Management and
Removal.”
Excessive Moisture in
Fuel
Use dryer wood
Refer to
“Types of Wood.”
Furnace boils
or rattles
before reaching
maximum
operating
temperature.
Improper Antifreeze.
Use recommended
Anti-freeze.
Contact your
Local Dealer .
Very hot burning fire.
Mix in some bigger or
less cured wood.
Refer to
“Wood.”
Firebox Door
pops or rattles.
Elbow(s) or hoses are
clogged, restricting water
flow through door hoses.
Unclog or replace
elbow(s) or hoses.
Refer to
“Firebox Door Hoses and
Elbows.”
Loading fuel too close to
the firebox door.
Load your fuel away
from the firebox door.
Refer to
“Loading wood into the
HEATMOR™.”
Very hot burning fire.
Mix in some bigger or
less cured wood.
Refer to
“Wood.”
Flash Curtain / Heat
Shield has been
removed.
Install Flash Curtain /
Heat Shield.
Refer to
“Flash Curtain / Heat Shield.”
Building too
warm.
Defective in-house
thermostat.
Replace thermostat.
Contact your
Local Dealer
.
PROBLEM CAUSE SOLUTION PROCEDURE