Heatmor 400-4S Скачать руководство пользователя страница 34

Страница: 34 / 95

Water Treatment Additives and Safety Specifications

Water Treatment Safety Specifications

DANGER: CORROSIVE MATERIAL - CAUSES BURNS

CAUTION: KEEP OUT OF THE REACH OF CHILDREN

Product Identification: Control Water Stove Treatment and Rust Inhibitor

Product Manufacturer: Image Supply Inc.

Contents:

Sodium Nitrate

Potassium

Hydroxide

Hidacid

Azure

Blue

Dye

Water

Danger:

Harmful or fatal if swallowed. Avoid skin, clothing and eye contact

Avoid breathing mist or vapors

Keep container closed and away from children

First Aid:

Skin Contact: Immediately flush skin with plenty of water. Remove contaminated

clothing and shoes. Wash clothing before reuse. Call a physician if irratation develops

and

persists.

Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes.

Inhalation: Move to fresh air.

Ingestion: Harmful or fatel if swallowed. Give several glasses of water followed by citrus

juice then olive oil. Get medical attention.

NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON

Handling instructions: Wear eye/face protection. Wear goggles and Alkali resistant gloves. Wear

suitable protective clothing.

Clean up: Contain and/or absorb spill with inert material(e.g. sand, vermiculite), then place in a suitable

container. Do not flush to sewer or allow to enter waterways. Use appropriate Personal Protective

Equipment. Neutralize area with vinegar. Wash contaminated clothing before reuse.

Other precautions:

Do not leave unattended when open.

not

reuse

container.

This product does not provide any freeze protection.

FOR MEDICAL EMERGENCIES CALL

United States: INFOTRAC 1-800-535-5053

Canada: 1-800-268-9017

Содержание 400-4S
































































































Результаты поиска

Содержание 400-4S

Отзывы:

Похожие инструкции для 400-4S

Бренды по названию

Популярные бренды

Heatmor 400-4S, Руководство пользователя

Результаты поиска

Содержание 400-4S

Отзывы:

Похожие инструкции для 400-4S

Бренды по названию

Популярные бренды