Heatline CaprizPlus 24 Скачать руководство пользователя

Страница: 4 / 52

- 4 -

Service Call 0844 736 9138, Technical Help (Chargeable) Call 0906 802 0253

2.2

Data label

The data label certifi es the country where the appliance is

intended to be installed. It is located on the rear of the drop

down control box

The data label contains the following data:

- The name of the manufacturer

- The country of intended destination

- The commercial name of the appliance and its serial number

- The types of fl ue installations authorised

- The appliance's gas category

- The gas type, group and pressure, set in the factory

- The DHW specifi c fl ow rate (D)

- The maximum pressure in the heating circuit (PMS)

- The maximum pressure in the domestic water circuit (PMW)

- The NOx class of the appliance

- The type and voltage of electricity supply

- The maximum power rating

- The electrical protection class

- The minimum and maximum heat input (Q)

- The minimum and maximum power output (P)

- The CE number and logo

The appliance shall only be connected to the gas

type(s) indicated on the data label.

2.3

Gas category

This boiler is for use only on G20, but can be converted for use

on G31.

• To adapt the appliance to another type of gas, see the

chapter "Gas conversion".

2.4

Regulation and statutory requirements

CE Mark

This boiler meets the requirements of Statutory Instrument,

No. 3083 The Boiler (Effi ciency) Regulations, and therefore is

deemed to meet the requirements of Directive 92/42/EEC on the

effi ciency requirements for new hot water boilers fi red with liquid

or gaseous fuels.

Type test for purposes of Regulation 5 certifi ed by:

Notifi ed body IMQ 52BP2727 CE Directives 2009/142/EEC.

52BP2728DR CE Directives 92/42/EEC.

Product/production certifi ed by:

Notifi ed body IMQ 52BP2727 CE Directives 2009/142/EEC.

52BP2728DR CE Directives 92/42/EEC.

The CE mark indicates that the appliances described in this

manual are in compliance with the following directives:

- European directive n°2009-142 relative to gas appliances

- European directive n°2004-108 from the European Parliament

and Council relative to electromagnetic compatibility

- European directive n°2006-95 from the European Parliament

and Council relative to low voltage

- European directive n°92-42 relative to the yield of boilers

2.5

Hydraulic schematic

Key

1 Gas service isolating valve (Yellow)

2 Heating fl ow isolating valve (Red)

3 Heating safety valve

4 N/A

5 DHW fl ow sensor

6 Domestic plate to plate heat exchanger

7 By-pass

8 Heating return thermistor (Blue)

9 Condensate trap

10 Ignition and control electrode

11 Burner

12 Main heat exchanger

13 Thermal fuse

14 Flue outlet

15 Silencer

16 Heating expansion vessel

17 Fan

18 Gas control valve

Содержание CaprizPlus 24





















































Результаты поиска

Содержание CaprizPlus 24

Отзывы:

Похожие инструкции для CaprizPlus 24

Бренды по названию

Популярные бренды

Heatline CaprizPlus 24, Руководство по установке и обслуживанию

Результаты поиска

Содержание CaprizPlus 24

Отзывы:

Похожие инструкции для CaprizPlus 24

Бренды по названию

Популярные бренды