Heatline CaprizPlus 24 Скачать руководство пользователя страница 31

Страница: 31 / 52

- 31 -

Service Call 0844 736 9138, Technical Help (Chargeable) Call 0906 802 0253

Fault

codes Description

Cause

Solution

F73

Heating circuit pressure sensor fault

The sensor is shorted or disconnected.

• Check the sensor’s connections.

• Check the sensor.

F74

Heating circuit pressure sensor fault

Fault in pressure sensor

F76

Thermal fuse fault

Thermal fuse disconnected

Defective thermal fuse

• Check the fuses connections.

• Replace the heat exchanger.

F77

Fault in gas valve motor.

Defective gas valve.

Defective condensate pump (option)

• Check the gas valve connections.

• Check the operation of the gas valve.

• Check the operation of the condensate pump (option).

F83

No water in the installation : the temperature

does not increase when the burner is lit

Return water valve closed

Pump disconnected

Leak in the installation

• Fill the installation.

• Purge the installation.

• Check the pump connections.

• Check the fl ow and return heating sensor

connections.

• Check that there are no leaks.

F84

Permanent temperature difference between

fl ow and return heating sensors

Inverted or disconnected fl ow and

return heating temperature sensors

Defective temperature sensors

• Check temperature sensors connections.

• Replace faulty sensors.

F85

Flow and return heating sensors fault

Flow and return heating temperature

sensor connected to same tube

• Check temperature sensors connections.

F86

Underfl oor heating contact fault

Floor heating contact open

Sensor disconnected or defective

• Check the sensor connections.

• Check that the sensor is connected to the main

board and the shunt is removed.

Err

User interface fault

Defective user interface

• Check connection from user interface PCB to main

PCB.

• Replace user interface.

15.4 Functional fl ow diagram

15.4.1

Central Heating

Содержание CaprizPlus 24





















































Результаты поиска

Содержание CaprizPlus 24

Отзывы:

Бренды по названию

Популярные бренды

Heatline CaprizPlus 24, Руководство по установке и обслуживанию

Результаты поиска

Содержание CaprizPlus 24

Отзывы:

Бренды по названию

Популярные бренды