02-02
13
28467 Rev I
NOVUS TOP DV GAS APPLIANCE INSTALLATION INSTRUCTIONS
Note:
Squeezing the pipe slightly to fit may be
necessary.
Note:
Make sure that the seams are NOT
aligned in order to prevent unintentional
disconnection.
Figure 20
Figure 21
Figure 22
3. ASSEMBLING THE VENT SECTIONS
a. Attaching the Venting to the Appliance
To attach the first VP section to the appliance collars, slide the
flared end of the inner flue of the VP section over the inner collar
on the appliance. At the same time, insert the outer flue into the
outer collar on the appliance. Push the vent section into the
appliance collar until all the lances have snapped into place.
Tug slightly on the vent to confirm it has completely locked in
place.
b. Assembling Vent Sections
1)
Start the flared inner flue of section A over the inner flue of
section B.
2)
Insert the outer flue of section A into the outer flue of section
B. See Figure 20.
Once both inner and outer flues are started, press section
A into section B firmly until all lances have snapped into
place. Tug slightly on section A to confirm it has completely
locked into place. See Figure 21.
c. Assembling Minimum Installation (MI) Sections
MI sections are non-unitized so that they can be cut to a certain
length. To use these sections, they must be cut to length from
the non-expanded end. See Figure 22. They can then be attached
by first connecting the expanded end of the MI inner flue with the
inner flue from the adjacent vent section and securing with three
screws. The expanded portion of the MI inner flue must overlap
completely with the untreated end of the adjacent vent section.
The outer flue can then be inserted into the adjacent outer flue
expanded end and attached to the next vent section with three
screws. The other end of the MI vent section can then be attached
by fitting a snap lock section to it and snapping it together as
normal.
All manuals and user guides at all-guides.com
