01/04
35593 Rev G
3
CALIBER DESIGNER DIRECT VENT
A. APPLIANCE SPECIFICATIONS
1. U.S. and Canada Certification
The Caliber Series Gas Appliance has been tested in accordance with the ANSI standard
Z21.50-2000
,
CAN/CSA
2.22-2000
, and
UL 307B
, and has been listed by Underwriters Laboratories Inc. for installation as described in this
manual. All components are UL, AGA, CGA or CSA safety certified.
2. Local Codes
This installation must conform with local codes. In the absence of local codes comply with the
National Fuel Gas
Code ANSI Z223.1-latest edition
in the U.S.A., and the
CAN/CGA B149, Installation Codes
in Canada.
The Caliber Designer Series gas appliance has been tested and listed for use in manufactured housing (mobile
homes). These installation instructions conform with the
Manufactured Home Construction and Safety Standard
,
Title 24 CFR, Part 3280
, or when such a standard is not applicable, the
Standard for Manufactured Home
Installations
,
ANSI A225.1
.
For assistance during installation contact your local dealer or contact Heatilator Technical Services Department,
Hearth & Home Technologies, 1915 W. Saunders Street, Mt. Pleasant, Iowa 52641, 1-800-927-6841.
HEATILATOR® is a registered trademark of Hearth & Home Technologies
3. Glass Specifications/Certifications
Heatilator gas appliances manufactured with tempered glass may be installed in hazardous locations such as
bathtub enclosures as defined by the CPSC. The tempered glass has been tested and certified to the requirement
of
ANSI Z97.1-1984
and
CPSC 16 CFR 1202
. (Safety Glazing Certification Council
SGCC# 1595
and
1597
. Architectural
Testing, Inc. Reports
02-31919.01
and
02-31917.01
.)
This statement is in compliance with
SPCS 16 CFR Section 1201.5
Certification and labeling requirements which
refers to
15 USC 2063
stating, Such certificate shall accompany the product or shall otherwise be furnished to any
distributor or retailer to whom the product is delivered.
Some local building codes require the use of tempered glass with permanent marking in such locations. Glass meeting
this requirement is available from the factory. Please contact your dealer or distributor to order.
CAUTION:
Do not expose the appliance to the elements (such as rain, etc.).
Note:
Installation and repair should be done by a qualified service person. The appliance should be inspected before
use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint
from carpeting, bedding material, etc. It is imperative that control compartments, burners and circulating air passageways
of the appliance be kept clean.
WARNING!
This appliance is tested and listed for use only with the op-
tional accessories listed in these instructions. Use of optional
accessories not specifically tested for this appliance could void
the warranty and/or result in a safety hazard.
Æ
