6
35593 Rev G
01/04
CALIBER DESIGNER DIRECT VENT
B. LOCATION AND CLEARANCES
Note:
Minimum and maximum clearances must be maintained at all times. Illustrations throughout these instructions
reflect typical installations and are for design purposes only. Actual installation may vary slightly due to individual
design preferences.
The illustrations and diagrams used throughout these installation instructions are not drawn to scale.
Dimensions
1. Appliance Locations and Space Requirements
Figure 1 illustrates a variety of ways the appliance may
be located in a room. The Caliber Series may be
installed directly on the floor or raised on a hearth.
These appliances are certified for installation in a
bedroom, bed/sitting room, and in manufactured
housing (mobile homes) in the U.S. and Canada.
Figure 1 - Appliance Locations
Figure 2
Appliance Clearances to Combustible Materials
2. Clearances
Figure 2 shows all clearances that must be maintained
around the appliance. See pages 10 and 11 for
termination cap clearances. See Figures 19, 20, 29
and 32 for vent clearances.
