heat-timer Genesis, Инструкция по установке и эксплуатации

Страница: 21 / 76

059705–00 REV. B HEAT-TIMER CORP.
|
21
10
INSTALLATION INSTRUCTIONS
The Genesis Heat-Timer ® installation process consists of the following basic steps:
1 Initial installation—Design Considerations.
2 Mounting the Genesis Heat-Timer ® control (see page 22) .
3 Locating and installing the sensors.
4 Connecting the Genesis Heat-Timer ® wiring (see “Wiring” on page 26) .
• Power wiring
• Output wiring
• Input wiring
5 Completing programming of the Genesis.
• Hot Water Applications (see page 33) .
• Steam Applications (see page 33) .
SUPPLIED MATERIALS
The following materials are supplied with the control:
• Genesis Heat-Timer ® control 926842–GENLT.
• Two Temperature Sensors with Enclosures (P/N 904220–00.)
• Three Wireless Space Temperature Sensors (P/N 904395–00.)
• Wall Anchors and Screws.
• Installation and Operation Manual (P/N 059705–00.)
• Warranty Card (P/N 059115–00.)
REQUIRED MATERIALS (NOT SUPPLIED)
The following materials/tools are required for installation, but are not supplied:
• General tool kit (screwdrivers, wire strippers, power drill, etc.)
• 18 AWG cable (Heat-Timer P/N 703001–01 or equivalent #18/2 cable).
DESIGN CONSIDERATIONS
When installing the system, certain design considerations must be taken into account. These include:
• Genesis Heat-Timer ® control Location.
• Outdoor Temperature Sensor Location.
• Heating System Sensor Location.
• Output Control: Burner or Motorized Valve.