manualshive.com logo in svg

Heartland Classic HL-CKNG, Руководство пользователя

Поделиться
Скачать
Heartland Classic HL-CKNG Скачать руководство пользователя страница 42

Replacement of parts (Electrical Controls)

BEFORE REMOVING SERVICE ACCESS COVERS
ENSURE THAT ALL ELECTRICAL SUPPLIES TO THE
APPLIANCE HAVE BEEN TURNED OFF.

SEE FIG. 25

1.

Remove the controls door and place in a safe position.

2.

Remove thermostat control knob.

3.

Remove the (2) cover panel fixing screws.

4.

Remove cover panel. It will be necessary to 
disconnect the push on tags from the timer, noting 
position of wiring.

5.

Remove the (4) control panel fixing screws.

6.

Tilt the chassis forwards from the top and lift out. To 
fully access the rear of the control chassis, the oven 
thermostat capillary and overheat thermostat capillary
should be removed from the oven. Follow instructions
in section ‘TO FIT NEW OVEN CONTROL
THERMOSTAT’,  Steps 3 to 6.

SEE FIG. 26   

DISCONNECT THE POWER TO THE APPLIANCE.

1. Remove burner door and base plate.
2. Remove bracket.
3. Disconnect transformer.
4. Replace transformer.
5. Reconnect wiring.
6. Replace bracket.

SEE FIG. 27   

DISCONNECT THE POWER TO THE APPLIANCE

1. Remove burner door and base plate.
.
2. Replace fuse.

ELECTRICAL COMPONENT

ACCESS

FIG. 25

DESN 511443 

DESN 512577

DESN 512578

TRANSFORMER

FUSE

FIG. 26

FIG. 27

42

Содержание Classic HL-CKNG





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды