manualshive.com logo in svg

Heartland Classic HL-CKNG, Руководство пользователя

Поделиться
Скачать
Heartland Classic HL-CKNG Скачать руководство пользователя страница 18

Thank you for buying an Aga appliance. To get the best from it, please read this leaflet and carefully follow the instructions
before using your Aga for the first time.

Consumer Protection

As manufacturers and suppliers of cooking and heating products, we take every care to ensure, that these products are
so designed and constructed as to meet the general safety requirement when properly used and installed. To this end, our
products are thoroughly tested and examined before dispatch.

IMPORTANT NOTICE

: Any alteration that is not approved by Aga Ranges could invalidate the approval of the appliance

and affect your statutory rights. In the interests of safety and effective use, please read the following before using your new
Aga appliance.

The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure
that the kitchen is well ventilated; keep natural ventilation holes open or install a mechanical ventilation device (mechanical
extractor hood).

Prolonged intensive use of the appliance may call for additional ventilation, (e.g., the opening of a window), or more
effective ventilation, (e.g.,increasing the level of mechanical ventilation where present).

Installation must adhere to Local and National Wiring Regulations and carried out by a Qualified Engineer.

If the weather is very cold, the appliance can be run continuously on the low setting and turned up as required. 

Do not

use to warm a room with the appliance oven doors open

.

Your Aga comes complete with the following:-

1 Meat Tin

1 Grill Rack

1 Solid Shelf

2 Grid Shelves

1 Cookbook

1 Warranty Card

1 Users Instruction

1 Installation Instruction

1 Servicing Instruction

INTRODUCTION

18

Содержание Classic HL-CKNG





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды