manualshive.com logo in svg

Heartland Classic HL-CKNG, Руководство пользователя

Поделиться
Скачать
Heartland Classic HL-CKNG Скачать руководство пользователя страница 30

REMEMBER: BE CAREFUL OF THE HOT APPLIANCE!

Enamelled Top Plate and Front Plate

z

It is not advisable to put wet clothes on the handrail: this may craze the enamel.

z

To keep the vitreous enamelled surface bright and clean, wipe over daily with a soapy damp cloth, followed by a
clean dry cloth.

z

Wipe off any condensation streaks on the front plate as they occur or the vitreous enamel may be permanently
discolored.

z

If milk or fruit juice or anything containing acid is spilled on the top plate or down the cooker, be sure to wipe it
immediately or the vitreous enamel may be permanently discolored.

z

Keep a damp cloth handy while cooking, to wipe up spills as they occur, so they do not harden and become more
difficult to remove later. 

z

For stubborn deposits, gentle localized soaking, not flooding, is easier than rubbing. Hot water and detergent will 
soften most burnt stains in about 10 minutes.

z

A soap impregnated pad can be carefully used on the vitreous enamel.

Oven Door Linings

z

Using oven gloves, carefully lift off the oven doors and lay them on a tea towel to protect the enamel. They can then
cleaned with a cream cleanser or soap impregnated pad. Do not immerse the doors in water as they are packed with
insulating material which will be damaged by excessive moisture.

Insulating Lids

z

Chrome 

Wipe over with a soapy damp cloth followed by a polish with a clean dry cloth.

z

Linings

The linings of the insulating lids may be cleaned with a cream cleanser or soap impregnated pad.
Open the lids to allow them to cool a little before cleaning.

Ovens and Hotplate

z

Use a wirebrush for cleaning the hotplate to remove any burnt spills.

z

In the Roasting/Baking oven, spills and fat splashes are carbonized at high temperatures. Occasionally brush out with
a wire brush. Do not use oven cleaners.

z

The Simmering/Warming Oven should also be brushed or wiped out occasionally.

DO NOT USE ANY OVEN CLEANERS

Accessories

z

Oven furniture such as Roasting Tins, Solid Plain shelves, Grid Shelves and Grill Racks should be cleaned in hot 
soapy water. Soak if necessary. A nylon scouring pad can be used.

DO NOT PLACE IN THE DISHWASHER OR USE CAUSTIC CLEANERS

CLEANING AND CARING FOR YOUR AGA

30

Содержание Classic HL-CKNG





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды