Heartland Classic HL-CKNG Скачать руководство пользователя страница 23

Страница: 23 / 52

USING THE TIMER

SETTING THE TIME OF DAY

Press and hold the

MINUTE TIMER

and

COOK TIME

buttons at the same time, (the word

AUTO

flashes

and the

0.00

is displayed steadily) press the plus

or minus

buttons until the required time of day is displayed. The

time will increase/decrease from 12.00 hrs in minute intervals, slowly at first and then gaining speed.

The cooker is now ready for manual use.

AUTOMATIC COOKING CONTROL

This can be used to set an automatic cooking program. It switches the oven on and off at the pre-set times.

The maximum length of cooking program that can be set is 23 hours and 59 minutes (e.g., delay time + cooking time =
maximum 23 hours and 59 minutes).

Before setting a program, check that the clock is telling the correct time of day, and have the following information at hand.

The length of time the food needs to cook.

The time that the food will finish cooking.

The required oven setting.

SETTING THE AUTOMATIC COOKING PROGRAM

Either the

STOP TIME

the

COOK TIME

buttons can be pressed first.

Each setting will remain displayed for 5 seconds before changing back to display time of day.

An example of setting a program using the cook time button first.

The food needs 2 hours and 30 minutes at 140ºC (284ºF) and is required to be ready by 18.00 hours.

1. Place the food on the correct shelves of the oven.
2. Check that the clock is telling the correct time of day.
3. Press the

COOK TIME

button and then the plus

or the

minus buttons until 2 hours and 30 minutes is displayed.

4. Press the

STOP

button and then the plus

or minus

buttons until 18.00 hours is displayed.

5. Set the oven temperature control to 284ºF (Mark 1).
6. 5 seconds after setting, the clock will display the time of day and

AUTO

7. When cooking starts, the

COOK TIME

symbol illuminates and remains throughout.

8. When the cooking has finished, a beep will sound (four signals followed by a pause) and continue for 2 minutes, unless

cancelled manually.
The

AUTO

symbol will flash. To cancel these and return to manual press

MANUAL COOK

button twice.

Содержание Classic HL-CKNG





















































Результаты поиска

Содержание Classic HL-CKNG

Отзывы:

Бренды по названию

Популярные бренды

Heartland Classic HL-CKNG, Руководство пользователя

Результаты поиска

Содержание Classic HL-CKNG

Отзывы:

Бренды по названию

Популярные бренды