manualshive.com logo in svg

Heartland Classic HL-CKNG, Руководство пользователя

Поделиться
Скачать
Heartland Classic HL-CKNG Скачать руководство пользователя страница 1

PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLING OR USING THIS APPLIANCE.

INSTALLER: LEAVE THESE INSTRUCTIONS WITH THE APPLIANCE.

CUSTOMER: KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Remember, when replacing a part on this appliance, use only spare parts that you can be assured conform to the safety
and performance specification that we require. DO NOT use reconditioned or copy parts that have not been clearly
authorized by HEARTLAND APPLIANCES INC.

Installation, Servicing,

Users Instructions

& Cooking Guide

HEARTLAND COOKMASTER

OWNERS MANUAL

WARNING: If the information in this manual is not followed exactly, a fire or
explosion may result causing property damage,personal injury or death.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance.

WHAT DO YOU DO IF YOU SMELL GAS

z

Do not try to light any appliance.

z

Do not touch any electrical switch

z

Do not use any phone in your building.

z

Immediately call your gas supplier from a neighbors phone.
Follow the gas suppliers instructions

z

If you can not reach your gas supplier call the fire department.

Installation and service must be performed by a qualified installer, service
agency or the gas supplier.

FOR USE IN USA/CANADA

NATIONALLY RECOGNISED

TESTING LABORATORY 

05/06 EINS 514594

Содержание Classic HL-CKNG





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды