8
Classic 9800
30” WALL OVEN UNDER COUNTER
¼” Dia. Conduit Access Hole*
2
5/8” Plywood Floor (Must Support 250 lbs.)
See below for Support Platform Construction.
DIMENSIONS
Inches
cm
A
25
63.5
B
24 min
6
C
29-/6 +/- /6
74
D
24 min
6
E
28½
72.5
I
36
9.5
J
½
4
K
3 max
8 max
NOTES
Z
Do not block air exhaust slots along bottom of
oven.
W
Electrical connection for electric cooktop must be
in adjacent accessible location.
Y
Gas or electric cooktops may be installed over
ovens.
NOTE: * Hole must be cut as close to corner of cabinet as
possible.
Side and/or top fillers
may be necessary if unit
is positioned between
existing cabinets. Be
sure they are attached
securely, since they will
anchor the oven in the
cabinet.
Distance from rear cabinet wall to
inside of cabinet kick plate minus 1/8”
Note: This dimension varies
depending on cabinet construction.
Paint black (optional)
Top surface and side edges of plywood
If unit is positioned between existing
cabinets, it may be necessary to add a
cabinet kick plate to support platform.
Do not add if cabinet has kick plate
under the walloven cut-out.
Paint black (optional)
Front edge of plywood and
front of kick plate if needed