37
Classic 9800
PROBLEM
SOLUTION
Fan is heard when oven is turned on.
This is the cooling fan and is normal. The fan will continue to run
after use until the oven cools. (See page 19.)
•
Cooling fan continues to operate after the oven has
been tunred off.
This is normal. The fan will automatically shut off when the oven
has cooled.
•
Probe does not work.
Check to be sure probe plug is properly inserted into oven
receptacle.
Probe may not be positioned in food properly.
Probe temperature may have been improperly set.
Food may have been too cold or frozen when the probe was
inserted.
•
•
•
•
Fault Codes
The oven may detect a fault during programming or during
operation. If a fault is detected, the message “Fault detected - press
power to clear” or “Fault detected - press enter to try again” may
appear. Follow directions in the display. If the fault reappears or
does not clear, call an authorized servicer or the toll-free number in
the display.
If the same operation is attempted before having the wall oven
repaired, the message “Feature not available” will appear. The
feature will remain inoperable until service is obtained.
If the oven is heavily soiled, excessive flareups may result in a fault
code during cleaning. Press the CANCEL pad and allow the oven
to cool completely, wipe out excess soil, then reset the clean cycle.
If the fault code reappears, contact an authorized servicer.
•
•
•
There are no beeps and no display.
Oven may be in Sabbath Mode. (See page 28.)
Noises may be heard.
The oven makes several low level noises. You may hear the oven
cooling fan going on and off. You may also hear the oven relays as
they go on and off. These are all normal.
As the oven heats and cools, you may hear sounds of metal parts
expanding and contracting. This is normal and will not damage
your appliance.
•
•