HealthCare International CardioStep, Руководство пользователя

Страница: 24 / 29

22
Display Settings
– Engineering Mode
To enter the Engineering Mode first make sure you are on the home screen by pressing
RESET twice. Then press and hold ENTER, QUICK START , and [+]
button at the same time.
Once in the Engineering Mode press ENTER to view settings and [+] / [-] buttons
to cycle settings. Press PAUSE to go back a page.
Edit Settings
Use the ENTER
button to select a setting from the list (Including “EXIT”).
Use the [+] / [-] buttons to navigate and change settings.
Use the QUICK START button to confirm changes to settings.
The PAUSE button will take you to the previous screen.
1. Key Test
– Make sure all of your keys are functioning. Press all the keys!
2. Display Test
– See if any dot cells are not working on your display.
3. Functions
3.1. ODO Reset
– Reset your unit’s internal odometer.
3.2. Change Units
– Use the [+] / [-] buttons to change units.
3.2.1. When the correct unit is displayed press QUICK START .
3.2.2. Press PAUSE to go to the previous page.
3.2.3. Use [+] / [-]
buttons to navigate to “EXIT” then press
ENTER to return to the
home screen.
3.2.4.
On the home screen (“M’) for miles or (“KM”) for kilometers will show on the
bottom right of the display.
3.3. Display Mode
– Turn display mode “ON” or “OFF”.
3.4. Manual
– DO NOT CHANGE
3.5. Elliptical or Bike
– setting for elliptical or bike. (DO NOT CHANGE).
3.6. Key Tone
– Turn Key tone “ON” or “OFF”.
4. Security
4.1. Child Lock
– Turn child lock “ON” or “OFF”.
5. Factory Set
– Reset your unit to default settings.
6. Exit