HCO
1-General Information SG550/SG530
Page 3
Figure 3: Connecting
camera
with remote control
1.4 Memory
The camera uses a SD card to save images (in .jpg format) and videos (in .avi format). Before
inserting the SD card into the card, please make sure that the write-protect on the card is
disabled so that it is writable. The supported card capacity is between 8 MB and 2 GB. Some
card may not be compatible with this camera.
The camera doesn’t have an internal memory, so the SD card must be installed before use.
To install the SD card, please open the bottom cover by pushing it to the indicated direction on
the cover, and then slide the SD-card into the card slot with unmarked side upwards. A slight
snapping sound indicates that the card is connected successfully. To take out the SD-card, just
push the card in gently. The card will be released from the slot when you hear a slight
snapping sound.
