HCO
5-Advanced Setting SG550/SG530
Page 21
the camera’s TV out jack and the TV’s input jack.
2.
Set the camera to the Test mode. Set the TV to an appropriate input mode.
3.
Press the OK key. The latest picture (or video) will be displayed on the TV. Press
the SHOT key to start to play if it is a video clip. When viewing images, the total
number of images in the SD card and the index of the displaying image will be
shown in the center of the LCD and at the bottom of the TV monitor.
4.
Press the UP key for the previous picture (or video) and the DOWN key for the
next one.
5.
Push the OK key to return when playback is finished.
Editing
1.
While you are viewing images and videos, Press the MUNU key the
【
Del Image
One
】
will be displayed in the LCD. Press the RIGHT key the LCD will show
【
Del Image All
】
.
2.
【
Del Image One
】
will only delete the current image or video.
【
Del Image All
】
will delete all the images and videos.
3.
Choose what you would like to delete and Press the OK key, you will be asked to
confirm. Default answer will be No. Press the RIGHT key to change to Yes and
then
【
Yes
】
will be highlighted.
4.
Press the OK key to delete or press the MENU key to cancel and exit.
4.3 Live
Monitor
In the TEST mode, you can do all the settings, such as camera mode and trigger interval time.
After you switch to the Live mode, the camera starts monitor automatically.
After the camera enters the Live mode, the motion indicator LED (red) on the front of the
camera will blink for around 10s. This time period lets you prepare the camera ready to
monitor. After the indicator stops blinking, the PIR starts to work.
When human or animal enters the monitored range, the PIR can detect them and then the
camera starts to take picture(s) or video as programmed. The PIR will be deactivated for pre-
defined trigger interval time and then be reactivated after trigger interval time is over. The PIR
is sensitive to temperature. The higher temperature and larger object, the longer distance the
camera can detect. The longest distances the PIR can detect are 65Ft at 32F and 20Ft at 90F.
4.4 Sensible Angle and Distance Test
If you want to know whether the camera can detect a certain spot, you can test according to the
following procedure:
1.
Switch the camera to the Test mode.
2.
Make movements around a certain spot in front of the camera. If the PIR indicator LED
blinks, it indicates that position can be sensed. Otherwise, that place is out of the
