HCO
5-Advanced Setting SG550/SG530
Page 15
and 11(3).
（
a
）
(1)
（
b
）
(2)
（
c
）
(3)
Figure 11: Setting video length
4.1.8
Trigger Interval Time
The trigger interval time means that how long the PIR will be disabled after each trigger. This
will only be effective in the LIVE mode. PIR will not react to the motion of human or animal.
This parameter has 120 values, from 0 to 59 seconds (with the increment of 1 second) and
from 1 to 60 minutes (with the increment of 1 minute). The default value is 1 minute (60
seconds). Press the RIGHT key to change the value by one second or press the RIGHT key
and hold for a few seconds, the value will be increased by 5 seconds or 10 seconds.
1
In MENU, press the UP or DOWN key until Interval appears, as shown in Fig. 12(a)
and 12(1).
2
Press the RIGHT key until the desired value appears, as shown in Fig. 12(b) and 12(2).
3
Press the OK key to save or press the MENU key to cancel and exit. After pressing the
OK key, the selected value will no longer be highlighted, as shown in Fig. 12(c) and
12(3).
(a)
(1)
