HCO
5-Advanced Setting SG550/SG530
Page 18
The Start and Stop time will only be effective when the timer is set to the value On.
1
In MENU, press the UP or DOWN key until Timer Switch appears, as shown in Fig.
15(a) and 15(1).
2
Press the RIGHT key to switch between On and Off of this function, as shown in Fig.
15(b) and 15(2).
3
Press the OK key to enter the setting of the Start time. The hour of Start time will be
highlighted, as shown in Fig. 15(c) and 14(3).
4
Press the UP or DOWN key until desired hour appears, as shown in Fig. 15(d) and
15(4).
5
Press the RIGHT key to set minute of the Start time. The minute of Start time will be
highlighted, as shown in Fig. 15(e) and 15(5).
6
Press the UP or DOWN key until the desired minute appears, as shown in Fig. 15(f)
and 15(6).
7
Press the RIGHT key to set the hour of the Stop time. The hour of the Stop time will
be highlighted, as shown in Fig. 15(g) and 15(7).
8
Press the UP or DOWN key until the desired hour of the Stop time appears, as shown
in Fig. 15(h) and 15(8).
9
Press the RIGHT key to set the minute of the Stop time. The minute of the Stop time
will be highlighted, as shown in Fig. 15(i) and 15(9).
10
Press the UP or DOWN key until the desired minute of the Stop time appears, as
shown in Fig. 15(j) and 15(10).
11
Press the OK key to save or press the MENU key to cancel and exit. After pressing the
OK key, the selected value will no longer be highlighted, as shown in Fig. 15(k) and
15(11).
(a)
(1)
(b)
(2)
(c)
(3)
