HBM WE2107, Быстрый старт

Страница: 37 / 76

37
WE2107
A2087-1.3 en/de HBM
Main menu 2nd level 3rd level Sub‐menu explanation
Prt_S timE Print protocol settings: xx:xx (real‐time clock Hours : Minutes)
modE Time mode selection: 24 h / 12 h am / 12 h pm
dAtE dAY Day: xx
month Month: xx
YEAr Year: xx
Init ESC11 ESC sequence 1, byte 1: 0...255 (0=OFF)
ESC12 ESC sequence 1, byte 2: 0...255
ESC13 ESC sequence 1, byte 3: 0...255
ESC14 ESC sequence 1, byte 4: 0...255
ESC15 ESC sequence 1, byte 5: 0...255
ESC21 ESC sequence 2, byte 1: 0...255 (0=OFF)
ESC22 ESC sequence 2, byte 2: 0...255
ESC23 ESC sequence 2, byte 3: 0...255
ESC24 ESC sequence 2, byte 4: 0...255
ESC25 ESC sequence 2, byte 5: 0...255
idEnt nb Print protocol counter: 0...99999 (0=OFF)
Frt E_Ch Number of spaces in each line: 0...99
E_Ln1 Number of empty lines before printing: 0...99
E_Ln2 Number of empty lines after the protocol: 0...99
inPut InP_1 oFF / tArE / Prt / tilt (OM, Page 54)
InP_2 oFF / tArE / Prt / Loc_P
t_dLY Tilt delay time: (0...99) x 100 ms
buttn F1 _F1_ (short), function key assignment, see OM, Page 56
F1_L _F1_ (long) ”
F2 _F2_ (short) ”
F2_L _F2_ (long) ”
tESt diSPL Test display, LCD segments ON/OFF (via “NEXT” button)
UArt Transmission of 55Hex... (see OM, Page 58)
d_IO Test digital inputs/outputs (see OM, Page 58)
EEPro Checksum check in EEPROM: 0 = error, 1 = OK
buttn Button test (see OM, Page 58)
ScALE Funct Scale function: StAnd / FILL1 / FILL2 / FILL3
ACCES Menu access levels: 0...4
LEGAL Legal‐for‐trade operation: OFF / OIML / NTEP
AdJ SEtUP UnIt Physical unit: OFF / g / kg / t / lbs
AZEro Zero on startup: OFF / 2 / 5 / 10 / 20 / 50 %
ZtrAc Automatic zero tracking: OFF / ON (0.5d/s)
StiLL Standstill monitoring: OFF / +- 0.5 / 1 / 2 / 5 d/s
rES Increment: 1 / 2 / 5 / 10 / 20 / 50 d
Point Decimal point: 0=xxxxx / 1=xxxx.x / 2=xxx.xx / 3=xx.xxx / 4=x.xxxx
CAP Max. capacity (weighing range): 100...99999
rAnG1 Changeover point dual‐range scale (0 = single‐range balance)
rAnG2” Changeover point three‐range scale (0 = single/dual‐range balance)
CAL Calibration weight: 100...99999
EA_CL Gravitational acceleration at place of calibration: 9.7000...9,9000
EA_UL Gravitational acceleration at installation location: 9.7000...9,9000
inPut ZEro Value when scale is empty (but with initial load): 0.0000...2.0000
mV/V
SPAn Value at maximum capacity (but with initial load): 0.0000...2.0000 mV/V
MEAS ZEro Actual display when scale is empty (zero point adjustment with
“ENTER”)
SPAn Actual display with calibration weight (span adjustment with “ENTER”)
Lin diSP1 Display value 1
VAL1 Measured value 1 for dISP1
diSP2 Display value 2
VAL2 Measured value 2 for dISP2
F_AdJ dEFLt Restore the factory settings: YES / NO
oFF off Switch off the device with “ENTER”