6
T32FNA
Reconstruction and modifications
HBM’s express consent is required for modifications regarding the transduc-
er’s construction and safety. HBM does not take responsibility for damage re-
sulting from unauthorized modifications.
Qualified personnel
The transducer may be used by qualified personnel, only; the technical data
and the special safety regulations must in any case be observed. When using
the transducer, the legal and safety regulations for the respective application
must also be observed. The same applies if accessories are used.
Qualified personnel means: personnel familiar with the installation, mounting,
start-up and operation of the product, and trained according to their job.
Prevention of accidents
According to the prevailing regulation to prevent accidents a cover has to be
fitted after the mounting of the torque transducers T32 FNA as follows:
the cover must be stationary
the cover shall avoid any danger of squeezing and provide
protection against parts that might come loose
the cover shall be installed at a minimum distance from moving
pats or shall be of a nature that a hand cannot be put through
the cover shall be fitted even if moving parts are installed outside
the usual access area of persons.
Above regulations could only be disregarded if there is already sufficient
protection of machine parts owing to the design of the machine or due to other
precautions.
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]