HBM T32 FNA Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 32

HBM T32 FNA Скачать руководство пользователя страница 15

15

T32FNA

3.4

Fixing of the housing

The stator housing is fitted around the rotor without bearings or without any
mechanical connection. When delivered there are fixing elements at the sides
of the stator that serve as safeguard during transport and as mounting aid for
radial and axial positioning and ensure that stator and rotor axes are properly
aligned.

Important:

- The fixing elements must be screwed in during mounting and dismounting,

and during transportation of the torque transducer. This prevents any dam-
age to the signal transmitting devices on the stator and rotor.

- During operation fixing elements must be removed!

Follow these points when mounting:

(see section ”9. Dimensions”)

-

The T32 FNA shall be mounted in the train of shafts as delivered so that
the mounting plane of the stator is seated on the prepared support plane
without play or stress. The two connection flanges shall be connected to
the shaft ends or couplings respectively.

-

Any possible height difference shall be adjusted by shims. Screw in fixing
screws; do not yet tighten to avoid jamming of the fixing elements.

-

Mark position of the stator or adjust respective stops.

-

Remove fixing elements from the torque transducer.

-

Check dimension Z (see section ”9. Dimensions”).

-

Tighten fixing screws. Stator must stay in marked position or at stops. Ro-
tor must rotate freely.

-

Check if radial and axial tolerances are kept.

-

Check smooth running of the torque transducer, beginning with low speeds.

In the case of elastically suspended machines larger radial and axial move-
ments may occur. If the occurring movements exceed the permitted limits of

2.5mm, or

3mm resp. one must take care that the stator can follow the mo-

tions of the rotor, or the motions shall be properly decoupled.
If couplings are mounted a possible axial and radial play should be consid-
ered as well.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

«
...
13
14
15
16
17
...
»

Содержание T32 FNA

































Отзывы:

Нет отзывов