manualshive.com logo in svg

HBM CX27B, Руководство по эксплуатации

Поделиться
Скачать
HBM CX27B Скачать руководство пользователя страница 13

Safety instructions

Quantum

X

I3031-14.0

  

HBM: public

13

interruptions to signal transmission, e.g. via the bus
interfaces, do not cause undefined states or loss of data
in the automation device.

Error messages should only be acknowledged once the
cause of the error is removed and no further danger
exists.

Conversions and modifications

The module must not be modified from the design or
safety engineering point of view except with our express
agreement. Any modification shall exclude all liability on
our part for any resultant damage.

In particular, any repair or soldering work on
motherboards (exchanging components) is prohibited.
When exchanging complete modules, use only original
parts from HBM.

The module is delivered from the factory with a fixed
hardware and software configuration. Changes can only
be made within the possibilities documented in the
manuals.

Qualified personnel

Important

This device is only to be installed and used by qualified
personnel strictly in accordance with the specifications
and with the safety rules and regulations which follow.

Qualified persons means persons entrusted with the
installation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function. This module is only to be installed and

Содержание CX27B

































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды