HBK CB1010, Руководство по эксплуатации

Страница: 6 / 104

CANHEAD
SAFETY INSTRUCTIONS
4
1 SAFETY INSTRUCTIONS
Appropriate use
A CANHEAD module with connected sensors or transducers is to be used exclusively for
measurement tasks and related control tasks .Use for any purpose other than the above
shall be deemed to be inappropriate.
In the interests of safety, the device should only be operated as described in the Operat­
ing Manual. It is also essential to observe the appropriate legal and safety regulations for
the application concerned during use. The same applies to the use of accessories.
Each time, before starting up the equipment, you must first run a project planning and risk
analysis that takes into account all the safety aspects of automation technology. This
particularly concerns personal and machine protection.
Additional safety precautions must be taken in plants where malfunctions could cause
major damage, loss of data or even personal injury. In the event of a fault, these precau­
tions establish safe operating conditions.
This can be done, for example, by mechanical interlocking, error signaling, limit value
switches, etc.
Conditions on site
S
Protect the device from direct contact with water.
S
Protect the CANHEAD system from humidity or effects of the weather such as rain,
snow, etc. The equipment complies with protection class IP20 per DIN EN 60 529.
Connection threads in the housing need to be locked during operation.
S
Do not expose the instrument to direct sunlight.
S
Observe the maximum permissible ambient temperatures given in the specifications.
S
The permissible relative humidity at 31 ºC is 80 % (non condensing); linear reduction
down to 50 % at 40 ºC.
S
The devices are classed as overvoltage category II, pollution grade 2 equipment.
S
Place the device so that it can easily be disconnected from the mains at any time.
S
The CANHEAD system can be safely operated up to a height of 2000 m
General dangers of failing to follow the safety instructions
The device is a state of the art unit and as such is reliable. The module may give rise to
dangers if it is inappropriately installed and operated by untrained personnel.
Any person instructed to carry out installation, starting up, maintenance or repair of the
module must have read and understood the Operating Manual and in particular the
technical safety instructions.