HBK CB1010, Руководство по эксплуатации

Страница: 34 / 104

CANHEAD
CONNECTION
32
7.3.1 Pin assignment CB1010
Fig. 7.6 Full bridge and DC connector assignment
1))
PIN Designation Cable wires
1 Bridge excitation voltage (-); TEDS GND, 0‐wire 2
2 Sense lead (-)
TEDS, 0‐wire
2'
3 Measurement signal (+) 1
4 -10 V
5 + 10 V
6 Measurement signal (-) 4
7 Bridge excitation voltage (+) 3
8 Sense lead (+) 3'
7.3.2 CANHEAD with TEDS (CB1010)
TEDS (Transducer Electronic Data Sheet) is the designation for an electronic data sheet
in the transducer.
It is stored in an electronic module that is an integral part of the transducer. It can be
installed in the transducer housing, in the permanently mounted cable or in the connect­
ing plug.
1)
In a half-bridge configuration the same assignment applies as in a full-bridge configuration, though
wire 4 is omitted, meaning pin 6 is disabled.