HBK CB1010, Руководство по эксплуатации

Страница: 37 / 104

35
CANHEAD
CONNECTION
ing measuring point; should, for example, an SG become disconnected from mea­
suring point 8, the red LED will flash 8 times.
Hexa‐
deci­
mal
Error number
(decimal
value)
Error Remedy
1 1 internal bus error Repair situation
1)
2 2 Error during hardware testing Repair situation
1)
4 4 Setup data (system variables) cannot
be loaded; e.g. bridge excitation voltage
Enter the correct
variable
8 8 Setup data (system constants) cannot
be loaded; e.g. calibration values
Enter the correct
constant
10 16 Errors in certain parameters (e.g. CAN
address) in the system variant or sys­
tem constant
Enter the correct
parameter
20 32 Wrong command sent from ML74B to
CANHEAD (STO)
Repair situation
1)
40 64 Execution error Repair situation
1)
80 128 Measuring point error Check the measur­
ing point
100 256 Synchronization error: gate array error Repair situation
1)
200 512 Synchronization error: bridge excitation
voltage
Repair situation
1)
1)
when the error keeps occurring
Examples
LED flashes 7 times: errors 1+2+4:
S
Internal bus error, hardware test failure and wrong variables entered
LED flashes 20 times: errors 16+4:
S
Wrong parameters (setup data) entered