Hayward KingShark 2 Plus, Руководство по устранению неисправностей

Страница: 55 / 56

Troubleshooting
Sensor Bar adjustments and other minor repairs (make all adjustments in ¼” increments).
A. Raise Sensor Bar if machine:
1. Fails to climb out of the deep end.
2. Turns or hesitates on pool drain.
3. Turns away from curved wall too soon.
B. Lower Sensor Bar if:
1. Tips over before tripping or sensing wall.
2. Turns or hesitates on pool drain.
C. Sensor Bar adjustments required if machine turns in circles or twists cord.
1. Sensor Bar not level or too high possible hitting hood.
OR
2. Thread on reversing arm #RC1703 is worn or stripped not allowing
reversing mechanism to disengage.
3. Sensor Bar cable screws are loose.
4. Sensor Bar cable is broken.
5. Drive wheel is broken.
D. Remember this basic rule:
Check Sensor Bar regularly and keep the Sensor Bar level at ALL times.
Page 53