Your Emaux “Filter Max” Filter is a high performance
c o r r o s i o n - p r o o f f i l t e r t h a t h a s s u p e r i o r f l o w
characteristics that is with the ease of operation.
Everything is made simple from installation, operation
to the maintenance of the filter. Your “Filter Max” filter
will be your pool filtration partner that provides clear
water with the least maintenance hassle and care.
through the sand, flushing the trapped dirt and debris
out of the waste line. The duration of the backwash
operation will depends on how dirty your filter is.
Check the sight glass to see when the water becomes
clear. It is recommended that the backwash should be
at least 2 minutes long.
Once the backwash operation had been completed,
the filter should go through the process of “Rinse” and
then back to “Filter”. To do perform the different
operations, position the handle on the control valve as
indicated.
INSTALLATION
Installation had been made simple, the only tools
needed is a screwdriver and pipe sealant for plastic.
The filter should be installed as close to the pool as
possible, but keep a distance of at least 5 feet (1.5m).
Locate the Filter on hard, level surface, preferably in a
dry, shaded, and well-ventilated area. Prior to
installation give consideration to the following:
Position of suction, return, and waste connections.
Access for back-washing operation and servicing;
protection from sun, rain, splashing, etc; Drainage of
filter room; Ventilation and protection of the motor.
1/ Place the empty tank in position.2/ Fill the tank with
water to the level that covers the laterals about 1/3 of
the tank is recommended. This will avoid damages to
the laterals by the force of the sand when pouring into
the filter.
WAR NING
B E F O R E I N S TA L L AT I O N B E
S U R E T O R E A D A L L
INSTRUCTIONS AND WARNINGS
CAREFULLY. KEEP THIS USER MANUAL FOR
FUTURE REFERENCE.
HOW IT WORKS
The Filter uses special sand to remove dirt particles
from pool water. Filter sand is loaded into the filter tank
to act as the filtration media. The pool water which
contains dirt particles is pumped through your piping
system to the filter via the filter control valve. As pool
water passes through the filter, dirt particles will be
caught by the sand bed and filtered out. The cleaned
pool water is returned from the bottom of the Filter
Tank, through the control valve and back to the pool
through your piping system. The entire sequence is
continuous and automatic. It is this sequence that
provides the filtration process and circulation of water
in your pool.
With the filtration process, dirt will accumulate and
becomes saturated in the filter tank. Pressure in the
tank will increase and the resistance of water flow will
occur. This means it is time to clean (backwash) your
filter. Another indication to know when to clean
(backwash) the filter is by checking the pressure
gauge reading. Backwash operation should be
performed when the pressure increases by 10psi
above the pressure when it was clean. Typically a
clean filter will run at 10 to 15psi depending, so take
note of the clean reading when the filter was installed.
When the pressure reaches approximately 20 to 25psi
or 50% increase from the clean reading proceed to the
Backwash operation.
To perform the Backwash operation position the
handle on the control valve to “Backwash”, the water
flow is automatically reversed through the filter so the
water is directed from the bottom of the tank, up
1-4
4-4
FILTER MAX SERIES
SIDE MOUNT FILTER
Emaux Swimming Pool Equipment Co., Ltd
Long Zhu Industrial Park, Nan Lang Industrial Area,Nan Lang Town, Zhong Shan City,
Guang Dong, China
Tel: (+86) 760 85527 988 Fax: (+86) 760 85527 188 Email:[email protected]
PARTS FOR FILTER MAX FILTER
SPECIFICATIONS
MF S17 / MF S20 / MF S24 / MF S27A / MF S27 / MF S31A
MF S31/ MF S35
1.Sand fill cover.
2. Place
on tank
opening.
3. Add water
to cover
laterals and
add sand.
MODEL: MFS17(
), MFS20
,
88012626
(88012627) MFS24(88012628),
MFS27A(88012629), MFS27(88012630), MFS31A(88012631),
MFS31(88012632), MFS35(88012633)
EMFI10042302
Water Technology
Water Technology
E
F
C
A
B
D
Key NO. Part Number
Product Description
QTY
1
89010701
Air Release Valve
1
2
06021002
Plasti c Pres sure Gauge With O-Ring (40psi)
1
3
01111048
Connector for Press ure Gauge/Stopper
1
4
01201022
Lid (Transparent)
1
5
01271021 Clamp Lock (left)
1
6
01271022 Clamp Lock (right)
1
7
03021035 M6 Nut
1
8
01111101 Star-Shaped Nut
1
9
03011166 M6×110mm Screws
1
10
03018124 Pin
1
11
02010007
O-Ring
1
01331036 MFS17 Filter Tank
1
01331037 MFS20 Filter Tank
1
01331038 MFS24 Filter Tank
1
01331049 MFS27A Filter Tank
1
01331039 MFS27 Filter Tank
1
01331050 MFS31A Filter Tank
1
01331040 MFS31 Filter Tank
1
01331041 MFS35 Filter Tank
1
88280805
1.5"Side Mount Valve for MFS17 MFS20 MFS24 MFS27A MFS31A Filter MAX
1
88280806
2.0"Side Mount Valve for MFS27 MFS31 MFS35 Filter MAX
1
01015002
1.5" C onnecti ng nut for MFS17 MFS20 MFS24 MFS27A MFS31A F ilter MAX
2
01015003
2.0" C onnecti ng nut for MFS27 MFS31 MFS35 Filter MAX
2
02011003
O-Ring for valve connection for MFS17 MFS20 MFS24 MFS27A MFS31A Filter MAX
2
02020016
O-Ring for valve connection for MFS27 MFS31 MFS35 Filter MAX
2
02010009
Spacer for Connecting panel for MFS17 MFS20 MFS24 MFS27A MFS31A Filter MAX
2
02010010
Spacer for Connecting panel for MFS27 MFS31 MFS35 Filter MAX
3
01172033
1.5" C onnecti ng panel for MFS17 MFS20 MFS24
1
01172002
1.5" C onnecti ng panel for MFS27A MFS31A
1
01170014
2.0" C onnecti ng panel for MFS27 MFS31 MFS35
1
89012611
Air Vent Pipe for MFS17
1
89012612
Air Vent Pipe for MFS20
1
89012613
Air Vent Pipe for MFS24
1
89012614
Air Vent Pipe for MFS27A MFS27
1
89012615
Air Vent Pipe for MFS31A MFS31
1
89012616
Air Vent Pipe for MFS35
1
89012601
MFS17 Top part of the inner tank sys tem
1
89012602
MFS20 Top part of the inner tank sys tem
1
89012603
MFS24 Top part of the inner tank sys tem
1
89012604
MFS27A Top part of the inner tank system
1
89012617
MFS27 Top part of the inner tank sys tem
1
89012605
MFS31A Top part of the inner tank system
1
89012618
MFS31 Top part of the inner tank sys tem
1
89012619
MFS35 Top part of the inner tank sys tem
1
01111046
1.5"Tank System Support for MFS17 MFS20 MFS24
1
01111043
1.5"Tank System Support for MFS27A MFS31A
1
01110018
2.0"Tank System Support for MFS27 MFS31 MFS35
1
89012606
MFS17 Bottom part of the i nner tank sys tem
1
89012607
MFS20 Bottom part of the i nner tank sys tem
1
89012608
MFS24 Bottom part of the i nner tank sys tem
1
89012609
MFS27A Bottom part of the inner tank system
1
89012620
MFS27 Bottom part of the i nner tank sys tem
1
89012610
MFS31A Bottom part of the inner tank system
1
89012621
MFS31 Bottom part of the i nner tank sys tem
1
89012622
MFS35 Bottom part of the i nner tank sys tem
1
01172007
Laterals (115mm) for MFS17
8
01172008
Laterals (126mm) for MFS20 MFS24 MFS27A MFS31A
8
01172010
Laterals (185mm) for MFS27 MFS31 MFS35
4
01172007
Laterals (115mm) for MFS27 MFS31 MFS35
4
23
89012516
Laterals bracket for MFS27 MFS31 MFS35
4
24
89011601
W ater Drain Set
1
01111059
Filter Base for MFS17 MFS20
1
01111062
Filter Base for MFS24 MFS27A MFS27
1
01331003
Filter Base for MFS31A MFS31 MFS35
1
25
22
21
20
19
18
16
17
14
15
13
12
