40
41
Manual Conpreva
Further informations
Further informations
Therapy specific parameter
You can set the
exercise duration
, the
EMG-setting
,
the
EMG-screen after current
, the
EMG-precision
setting
and the
Trigger options
.
The
exercise duration
exclusively refers to the fixed
programmes!
The EMG setting can:
•
automatic (during the training phases the optimal
EMG range is constantly selected)
•
semiautomatic (during the actual EMG setting the
patient strongly tense up for 5 seconds. The
optimal EMG range is determined. During the
exercise the EMG range can be adapted only
manually)
•
manually (the patient sets the EMG range)
We recommend the semiautomatic EMG setting.
If you deactivate the
EMG-screen after current
, after
the current phase no EMG screen is indicated. The
current scale remains faded in.
If you activate the
EMG-precision setting
, the
maximum EMG attitude will be measured during the
exercise. The EMG scale and animation are scaled
according to this maximum value. The
EMG-precision
setting
should be combined with the semiautomatic
or manual EMG setting, not however with the automatic
EMG setting.
The
Trigger options
are divided into
Trigger automatic
,
with the appendant
Update rate
and
Trigger limit
with
appedant
time limit
.
If the
trigger automatic
is activated the threshold moves
down if the patient, doesn’t achieve the given threshold
value. The
update rate
determines the speed, with
which the threshold decreases. The trigger limit is the
time until the patient must reach the trigger threshold.
If he doesn’t accomplish it in the time predefined
time
limit
, the device automatically switch into the relaxation
phase.
Device specific parameter
This menu contains the items
patient selection,
electrode positions
and code request
.
If the
patient selection
is activated, a menu screen is
shown before each exercise, on which all patients are
shown. After you select the patient, the following
exercise is assigned to him. This option is particularly
recommended for hospital employment, if several
patients are to be treated with the same device.
If you deactivate the
electrode position
and only one
exercise is selected, the training begins immediately
after switching the device on. This is recommended,
if the patient does always the same training. If the
function is activated, before each training the electrode
position is shown.
Deactivate the
code request
, if the equipment is in the
hospital employment and it is worked repeatedly with
the menu. Activate the
code request
, if the equipment
remains with the patient. The patient cannot change
the therapy parameters.
