30
31
Manual Conpreva
Therapy settings
Inside the menu
therapy settings
extensive functions
are available, with whose assistance you can select
the suitable therapy for each patient. You have the
choice between these menu options:
• head / Extremities / torso (pressure)
• manually configuration
• general exercises
Over all up to seven different exercises are possible,
from which the patient will be able to choose one at
time. Therefore you can create a training schedule that
will be shown when the device starts. This training
schedule can contain up to seven different exercises,
consisting of fixed exercises, general exercises and
manually configurations. If you have already activated
seven exercises, you will be unable to activate any
further ones. First you must deactivate an active one.
Head / extremities / torso
Here you can find diagnoses that can be treaten with
the device. The numerous headwords, for example
migraine, describe the best therapy parameter in form
of fixed programs, designed after the current scientific
knowledge. After choosing one of these programsa
green check mark is visible behind the entry. Pressing
on this entry again will deactivate it - the green check
mark disappears.
Additional to this you will be asked to choose a position
for the electrodes. This specific position for the
electrodes will be displayed everytime the exercise is
being started.
The pressure and incontinence programs are available
under the menu-entry torso.
To adjust the exercise duration you have to choose
Exercise duration
within
System settings/therapy
spec. parameters
. The choosen exercise duration
does apply for all fixed exercises. You can set the
EMG-
setting
also in the menu
System settings/Therapy
spec. parameters/EMG-setting
.
Manually configuration
You can create six own configurations with your own
identification. Then the exercise programs can be
individually arranged for each patient, by activating or
deactivating the exercises.
•
Choose the
Operation mode
with wich the patient
have to work
•
Adjust the
frequency 1
and
frequency 2
. You must
adjust these two frequencies, since these
alternate after each current phase. This makes
possible to work with changing current forms in an
exercise - e.g. you can work in the one phase with
a frequency modulation, in the other phase with a
fixed frequency. If you would like to use only one
frequency, adjust for both frequencies the same
value. In order to activate the frequency
modulation, select
frequency modulation
instead
of
fixed frequency
. The modulation is processed
within 3 seconds from 4 Hz to 70 Hz.
In addition you can specify whether the device skip
the
current setting
and a set a
fixed current
, or the
patient can adjust the current. If you select
fixed
current
you jump into the current setting. Note that
you should specify the frequency and pulse width
before, since the effective current and thus feeling
of the current depend also on the frequency. The
pulse width is adjustable between 40
μ
s and 500
μ
s
Further informations
Further informations
