hd 680 DEI-V
ValiDoc Pro
Page GB 7
9.693.018
Version 1.06
1.3 General safety instructions
Our products are in a flawless condition in terms of safety technology when
they leave the plant.
To maintain this condition, the contents of these safety instructions as well as
type plates, labelling and safety instructions attached to the machine must be
observed while handling the machine (transport, storage, installation,
commissioning, operation and maintenance).
This machine is suitable for processing laminated films in the heat-sealing
process. See also chapter 2.1 "Designated use".
Please check the packaging and lodge a complaint for any damage with the
carrier or parcel service promptly before installing the machine.
Before commissioning, ensure that the machine does not show any evidence
of damage. In case of doubt, contact the manufacturer or a service partner
authorised by the manufacturer.
Do not operate the machine if the power cable or the power plug is
damaged. Do not use the machine if it does not operate correctly or it is
damaged in any way. If the mains cable or the machine have been damaged,
the machine must be repaired by the manufacturer or by one of the
manufacturer's authorised service partners.
The machine must be connected using the mains cable included in shipment
to a protective contact socket with a stable voltage. Operation on IT networks
is not permitted.
Place the machine on a stable base.
The machine must not be installed and operated in potentially explosive
areas.
If the sealing machine is brought directly from a cold environment into a
warm environment, condensation may form. Wait until temperature
equalisation has taken place.
Starting up the device when it contains condensation causes danger to
life!
Fuse changes and repairs must only be performed by the manufacturer or by
one of the manufacturer's authorised service partners.
But before switch off the machine and remove the power plug from the
socket.
Switch off the machine when it is not in use or remove the power plug from
the socket.
