Hawking Net-Vision HNC290G, Быстрое руководство по установке

Страница: 7 / 36

7
2
1
Locate the antenna
connector on the left side
of the camera’s rear panel.
Screw the base of the
antenna (included with the
HNC290G) into the
antenna
connector.
1
2
Locate the network cable connector (RJ -45 port) on the
camera’s rear panel. Connect an Ethernet cable to the port.
Connect the other end of the cable to the network (i.e. a
router or switch). NOTE: For initial setup, you will need
to use a
wired connection. After completing the setup and
configuration, you can begin using your camera wirelessly.