Hawking Net-Vision HNC290G, Быстрое руководство по установке

Страница: 28 / 36

28
If you have configured all the settings correctly and clicked
Finish on the Setup Wizard, you will use two different
methods to access your network camera: one for within your
local area network (LAN), and another for remote access from
outside your network.
To access/view your camera locally, from within your
network (i.e. not remotely over the Internet):
a. If you used the default web port 80 (see pg. 22), you can
access your camera by typing
“http://
IPAddressofCamera ” in the address bar of your
web browser, where “IPAddressofCamera” refers to the
IP address you established for the camera in the Setup
Wizard (see pg. 14).
b.
If you used a port number other than 80 for the web port,
you will need to follow the IP address with a colon and
the new port number. For example, if you set the web
port number at 82, you would type the following into the
web address bar:
“http:// IPAddressofCamera:82 ”