Hawking Net-Vision HNC290G, Быстрое руководство по установке

Страница: 16 / 36

16
Please highlight the appropriate wireless network that you
would like to assign the network camera to. You may choose
to scan for the following two types of networks: Infrastructure
(if you are using a router or access point) or Ad-hoc (for peer-
to-peer connection). Or, you may enter in your wireless
network information manually.
Click Next once you have selected your wireless network.
6
If you chose to connect to an encrypted network (one that
has “WEP” or “WPA” listed under the “Security” category on
the “Wireless Network” screen), the Security screen on the
following page will appear. If you are connecting to a
non-
encrypted wireless network, please click Next .
The “Security” screen allows you to set wireless encryption for
your network camera. Please note that your router or access
point must be broadcasting its wireless signal using the same
encryption method that you apply on this screen. There are
three available encryption methods:
a. WPA, b. WEP 64-Bit, c.
WEP 128-Bit. When using any of these encryption methods,
you must assign the same encryption key as the one used to set
up your router or access point.
Click Next once you have set up your encryption method.