Hawking Net-Vision HNC290G, Быстрое руководство по установке

Страница: 13 / 36

13
4
The Setup Wizard will try to determine your network settings.
Click on DHCP . If a DHCP server is present on your network,
the Wizard will obtain your network settings and automatically
configure your network camera by returning an IP address that is
consistent with your network. (If the Setup Wizard does not
automatically return an IP address in the “DHCP” category, try
clicking on
Manual IP and the DHCP again.)
If no DHCP server is present, the Wizard will poll your PC’s
internal network settings and suggest an appropriate static IP
address in the “Manual IP” section to assign to the network
camera. If you do not wish to use the suggested IP address, you
may change your IP settings in the “Manual IP” section only.
NOTE: Typically, your Gateway address is the IP address of your
network’s router or Internet gateway. The Wizard will try to
automatically fill this field, based on your PC’s current settings.
Please click Next once your computer has found the appropriate
IP settings.
NOTE: If you are unfamiliar with how to manually set an IP
address, an example is provided in the
Appendix (see pg. 30).