Hawking Net-Vision HNC290G, Быстрое руководство по установке

Страница: 22 / 36

22
11
In order to view your camera remotely via the web, you will
need to open two virtual ports on your router: 1. a web port, and
2. a video port. (Since the HNC290G does not have an audio
feature, you will not need to open an audio port.) The Setup
Wizard screen on the next page will allow you to do this. By
opening these ports, you are essentially creating a “tunnel” from
inside your network to the outside, through which you can view
your camera via the Internet.
Novice Setup : If you are unfamiliar with how to open ports on
your router, or if you would simply prefer to have the Setup
Wizard configure your router with the default settings, click on
the radio button for
Novice Setup . (The default settings are: web
port 80 , video port 5000 .)
Advanced Setup : If you are a more advanced user, or if you
know that port 80 is already in use on your network or has been
blocked by your ISP, click on
Advanced Setup and enter a
different web port number. In most cases, video port 5000 will
not be in use, but you can change that as well if you prefer.
Manual Setup : If you are an expert/advanced user and would
like to configure the ports directly from your router, click on
Manual Setup . This will require you to log in to your router, and
access its configuration pages to change the port settings.