Hawking Net-Vision HNC290G, Быстрое руководство по установке

Страница: 29 / 36

29
To access/view your camera remotely over the Internet
(i.e. from outside your network):
a. If you assigned a web address to your camera in the Setup
Wizard (see pg. 21), you can access your camera simply
by typing that web address into the web address bar of
your web browser. For example, if you assigned the
name “myhome” and domain name “.hawkingcam.com”
to your camera, you would type the following into the
web address bar:
“ http://www.myhome.hawkingcam.com ”
b. If you did not assign a web address to your camera, but
you did open ports on your router (see pg. 23), you would
follow steps similar to those described on the previous
page. However, rather than using the IP address of the
camera, you would use the public/WAN/Internet IP
address of your
router
(
followed by a colon and the web
port number if you chose not to use the default web port).
You can locate your router’s WAN IP address on the
status page of the router’s web user interface.
NOTE: If you did not open ports on your router and/or assign
your camera a web address, you will not be able access your
camera remotely.