Haverland RCB Benjamin, Инструкция по установке и эксплуатации

Страница: 12 / 20

12
1.2. WORKING DESCRIPTION
1.3. CHILDREN’S SAFETY
- RCB has 5 modes: Chrono, Pilot wire, Comfort, Night and Antifreeze.
- To change the current mode, press the FUNCTION button .
COMFORT
Unlimited time regulation for high temperature
All the pilot wire commands except STOP are disabled
ECONOMY Unlimited time regulation for low temperature
All the pilot wire commands except STOP are disabled
ANTIFREEZE Unlimited time regulation at 7°C
All the pilot wire commands except STOP are disabled
CHRONO Shows weekly programme at two temperature levels (high and low) established by the user hour
by hour. All the pilot wire commands except STOP are disabled
FILOT-WIRE
High temperature is modified by the commands received from the pilot wire central control unit.
This mode is not included in class I appliances (with earth connection). RCB decodes 6 commands:
comfort, reduction (high temperature - 3.5°), stop, antifreeze (7°), eco 1 (high temperature - 1°) and
eco 2 (high temperature - 2°)
Temperature settings are at two different levels. High temperature is used by the Chrono, Pilot wire and Comfort modes. Low
temperature is used by the Chrono and Night modes. The activated temperature level can be modified by the + and - buttons.
The thermometer symbol flashes when modification is taking place.
IMPORTANT: Changes in ambient temperature are normal with electronic thermostats when there are variations in the power
required or when conditions outside the room change. The setting is appropriate only for radiators installed in standard
environments. It is normal for the regulator setting to be different to achieve the same temperature in two separate places
(effect of the surrounding environment).
This function is used to block the buttons so that they cannot be used. It may be useful to activate it to avoid inadvertent setting
changes or tampering by unauthorized persons or children. To activate, hold down the + and – buttons simultaneously for at
least 3 seconds. A padlock icon appears when the buttons are blocked.
To deactivate the function, hold down the + and – buttons simultaneously for at least 3 seconds. The padlock icon will disappear
and the buttons can be used normally.
Bear in mind that for safety reasons this product must be out of reach of children.
Padlock icon
ENGLISH