HATO SWING 400, Руководство по сборке и эксплуатации

Страница: 5 / 36

button. It is essential to check regularly that all safety devices are working properly. We recommend
that the electronic clutch is regularly checked (every six months) with which the control unit should be
fitted.
EQUIPMENT
The following accessories are required for the assembly of the automatic system: wrenches,
screwdriver, tape measure, spirit level, saw, drill, welding machine.
INITIAL CHECK
1 - Read the instruction manual very carefully.
2 - In order to ensure correct operation of the gate automation, it should be well balanced and not
have any friction points;
3 - Also after mounting the drive, make sure that the gate is well balanced.
4 - Check that the electrical installation meets the parameters specified by the drive.
DECLARATION OF CONFORMITY
The HATO SWING 400/600 drive meets the requirements specified in the following regulations:
Complies with the conditions set out in the Machinery Directive 2006/42 / EC Annex II section B
together with later changes. Complies with the conditions of the following EU directives:
Directive on electromagnetic compatibility EMC 2014/30 / EU
Low Voltage Directive LVD 2014/35 / EU
The following harmonized standards have been applied:
EN 12100: 2012, EN 13857: 2010, EN60335-1: 2012, UNI EN 12453: 2002, as applicable
EN12445: 2002
the current declaration can be downloaded from the manufacturer's website: www.hato.com.pl
CONTENTS OF THE PACKAGE
After receiving the product, unpack it and check that it has not been damaged. In case of any
problems, please contact the seller. The following components should be present in the package.
NO PART QTY REVIEW PHOTO
1 SWING actuator 2 pcs
2 Control unit in the housing 1 pc
3 Capacitor 2 pcs
4 Mounting brackets 2 set
5