HATO SWING 400, Руководство по сборке и эксплуатации

Страница: 30 / 36

that has not been programmed will replace the button previously programmed in that
function. A button previously programmed to one function, after being programmed to
another, only works in the other function.
Programowanie nadajnika do funkcji sterowania sekwencyjnego SBS.
Hold down the LEARN button for less than
3s .
LEARN
The LED will flash rapidly.
Press the transmitter button within 10
seconds .
Correct programming will be signaled by the
LED2 blinking three time
.
2 blinks indicate
full memory. 1 blink means the end of the
learning time.
After correct programming, we have
another 10s to program the other
transmitters, etc.
To finish the procedure, wait 10 seconds
from the last programming or shortly press
the LEARN button. LED2 will blink and the
receiver will return to normal operation.
LEARN
Programming the transmitter for the WICKET/CH2 function
Depending on the CH / EZ switch (see CH2 / EZ OUTPUT FUNCTION), the transmitters
assigned to this function can control the CH2 output channel or the wicket function -
opening one gate leaf (M1). With the PHOTO CLOSE function active, when an obstacle
appears in the opening of the photocells, the gate will stop. It can be closed by pressing the
manual control button or the remote control assigned to this function. In conjunction with
the AUTO-CLOSE and PHOTO CLOSE functions enabled, during opening, when an object
appears in the light of the photocells, the gate will stop, and when the object is removed, it
will automatically close after 5 seconds.
Hold down the LEARN button.
LEARN
The LED2 will turn on and then turn off.
Release the button.
LEARN
The LED2 will flash rapidly.
Press the transmitter button within 10
seconds .
Correct programming will be signaled by the
30