HATO SWING 400, Руководство по сборке и эксплуатации

Страница: 34 / 36

sales document number, buyer's data, date and place of installation, buyer's signature)
2.2. Description of the product defect and a written complaint notification to the seller
2.3. Attaching a valid purchase document (applies to products to which the warranty card is not attached)
3.
The warranty does not cover:
a) mechanical, thermal, chemical and any other damage caused by the user's actions or omissions or external force (e.g.
atmospheric phenomena, surges or electrical disturbances, electromagnetic disturbances)
b) damage caused by:
- improper installation (inconsistent with the installation manual) and non-compliant use
- intended use or the instruction manual, design changes and modifications made by the user and third parties
- using malfunctioning or damaged products
- using non-original spare parts or accessories other than HATO
- too much work
c) damage to devices previously dismantled or repaired by unauthorized persons
d) devices with a damaged, illegible, incorrectly filled in warranty card or a broken seal
e) damage to devices used intensively and not subject to the required periodic inspection by the installer or other authorized
company (the fact of the inspection and the scope of the maintenance activities carried out must be recorded in the warranty
card)
f) replacement of parts with a specified lifetime that are subject to wear and tear during normal use: batteries, accumulators,
bulbs, fuses
g) maintenance
h) devices where the serial number has been removed, damaged or changed
4.
In the event of 4 unsuccessful warranty repairs, generally considered essential, the buyer has the right to replace the
goods with a new one, free from defects. If you purchase several devices in one set, the possibility of replacement
applies only to the device, the repairs of which have been unsuccessful four times.
5.
The buyer is obliged to notify the seller about the defect within 2 days from the date of its disclosure
6.
This warranty covers only HATO products installed and used in Poland
7.
An unfinished and / or non-stamped warranty card is invalid
8.
The warranty does not cover the costs of disassembly, reassembly and commissioning of the product as well as
transport to the HATO service.
9.
NOTE! The guarantee becomes void if the machine is installed by unauthorized persons.
34