Hatco Toast-Max TM-10H, Инструкция по установке и эксплуатации

Страница: 6 / 44

IMPORTANT SAFETY INSTRUCTIONS
5 Form No. TMCEM-0404
CAUTIONS
Some exterior surfaces on the unit will get hot. Use caution
when touching these areas to avoid injury.
To avoid damage to the unit or injury to personnel always
operate toaster with crumb tray installed.
To avoid any injury, do not remove the crumb tray
for cleaning until toaster is cool.
Unit is not weatherproof. For safe and proper operation
the unit must be located indoors where the ambient air
temperature is a minimum of 70°F (21°C) and a maximum
of 85°F (29°C).
CAUTIONS
Do not locate the toaster in an area subject to excessive
temperatures or grease from grills, fryers, etc. Excessive
temperatures could cause damage to the unit. Do not place
toaster in an area that restricts air flow around the front
or rear of the unit. Do not place toaster in direct discharge
path of air conditioning vent or makeup air vent.
Use only non-abrasive cleaners. Abrasive cleaners could
scratch the finish of your Toast-Max toaster marring its
appearance and making it susceptible to soil accumulation.
WARNINGS
To assure safe and proper operation while operating
in the Front Dishcarge mode, allow a minimum clearance
of 25 mm (1") along the sides and rear. Allow a minimum
clearance of 305 mm (12") along the front.
To assure safe and proper operation while operating
in the Rear Discharge mode, allow a minimum clearance
of 25 mm (1") along the sides. Allow a minimum clearance
of 305 mm (12") along the front and rear.
To prevent any injury or damage do not pull unit
by power cord.
To prevent any injury, discontinue use if power cord
is frayed or worn.
This appliance is not of jet-proof construction. Do not use
jet-clean-spray to clean this appliance.
If service is required on this unit, contact your
Authorized Hatco Service Agent, or contact the Hatco
Service Department at 414-671-6350; International
fax 414-671-3976.
This product has no “user” serviceable parts. To avoid
damage to the unit or injury to personnel, use only
Authorized Hatco Service Agents and Genuine Hatco Parts
when service is required.
Genuine Hatco Replacement Parts are specified to operate
safely in the environments in which they are used. Some
aftermarket or generic replacement parts do not have
the characteristics that will allow them to operate safely
in Hatco equipment. It is essential to use Hatco Replacement
Parts when repairing Hatco equipment. Failure to use Hatco
Replacement Parts may subject operators of the equipment
to hazardous electrical voltage, resulting in electrical
shock or burn.
MODEL DESCRIPTIONS
ALL MODELS
All Toast-Max™ Electric Conveyor Toasters are fast, reliable
and versatile, toasting up to 300 bread or bun product per hour.
The front or rear discharge allows the operator to place the Toast-
Max toaster where it is most convenient. Every Toast-Max toaster
features long lasting serpentine metal sheathed heating elements,
a permanently lubricated conveyor motor and a four position toast
selector switch. Every unit is shipped with 102 mm (4") adjustable
legs, a toast feed ramp, removable crumb tray and toast
collector pan.
TM-5H MODEL
The TM-5H model allows for toasting of bread products
up to 64 mm (2-1/2") thick and 245 mm (9-5/8") wide. Capacity
is up to 180 slices per hour.
TM-10H MODEL
The TM-10H model allows for toasting of bread products
up to 64 mm (2-1/2") thick and 245 mm (9-5/8") wide. Capacity
is up to 300 slices per hour.