background image

4

Form No. CWBM-1120

English

IMPORTANT SAFETY INFORMATION

All Models

Hatco Refrigerated Drop-In Wells are reliable and versatile. 

Each unit has an insulated, stainless steel and aluminized 

steel housing. The sides of the internal well are completely 

surrounded with a copper evaporator coil to provide even 

chilling from top to bottom. The Refrigerated Drop-In Well is 

controlled with a digital temperature controller and a Power 

I/O (on/off) Switch housed in a single, control box. The control 

box is connected to the condensing unit with a 48″ (1219 mm) 

power cord. A 6′ (1829 mm) power cord and plug connected to 

the control box provides power to the entire unit. 
All models are designed to be mounted to the topside of 

various types of countertop material including stainless steel, 

wood, Corian, Swanstone, etc... Hatco Refrigerated Drop-In 

Wells are designed, manufactured, and tested to maintain safe 

food holding temperatures.

The 

eco

ization logo identifies products designed to reflect 

Hatco’s commitment to improving, protecting, and preserving 

the global environment. Hatco Refrigerated Drop-In Wells 

qualify for the 

eco

ization logo through the use of green-friendly 

insulation as well as a highly efficient condensing unit.
Each model of Refrigerated Drop-In Well is supplied from 

the factory with the appropriate number of 20″ (508 mm) Pan 

Support Bars, depending on the model’s pan capacity.
Each individual well is capable of holding a variety of pan 

combinations of full size, 1/2-size, 1/3-size, and/or 1/6-size 

pans with accessory Adapter Bars.
Food Pans, Pan Support Bars, Adapter Bars, and other 

accessories are available for the Refrigerated Drop-In Wells.  

Refer to the OPTIONS AND ACCESSORIES section in this 

manual for details. 

CWB-1

CWB-2

CWB-3

CWB-4

CWB-6

CWB-5

Pans Not Included

MODEL DESCRIPTION

NOTICE

Do not locate unit in area with excessive air movement 

around unit. Avoid areas that may be subject to active air 

movements or currents (i.e., near exhaust fans/hoods, air 

conditioning ducts, and exterior doors).

NOTICE

This unit is intended for commercial use only—NOT for 

household use.

Содержание CWB Series

































Отзывы: