Harris NEXIO AMP NX3801HDX, Руководство по установке оборудования и инструкция пользователя

Страница: 42 / 140

Chapter 2
Hardware Installation
32
©2011 Harris Corporation. All rights reserved.
Table 2-1 NEXIO AMP Rear Panel Port Connectors
Port Description
SYS ID SYS ID Button
Used to identify a server from the front.
Power Supply
Alarm Reset Power Supply Alarm Reset Button Silences the power supply alarm.
Power Supplies Power Supply 1, Power Supply 2 Two hot swappable, redundant power
supplies.
HD/SD and SDI
Video IN1, IN2, IN3, IN4 Four BNC connectors for HD-SDI and SDI
video inputs 1 through 4.
REF IN BNC connector for analog bi-level or
tri-level reference input.
LOOP BNC connector for analog reference
passive loop-through. Loop output = REF
IN input. If the loop-through is not used,
connect a 75

terminator to this jack.
LOOP IN1, LOOP IN2, LOOP IN3,
LOOP IN4 Four BNC connectors for loop-through
of inputs 1 through 4.
OUT1, OUT2, OUT3, OUT4 Four BNC connectors for HD-SDI and SDI
video outputs 1 through 4.
AES Audio IN1 Four HD-BNC connectors for AES/EBU
audio input. Connect to these ports
when using AES/EBU audio and Dolby E
for input 1.
1/2, 3/4, 5/6, 7/8
IN2 Four HD-BNC connectors for AES/EBU
audio input. Connect to these ports
when using AES/EBU audio and Dolby E
for input 2.
1/2, 3/4, 5/6, 7/8
IN3 Four HD-BNC connectors for AES/EBU
audio input. Connect to these ports
when using AES/EBU audio and Dolby E
for input 3.
1/2, 3/4, 5/6, 7/8
IN4 Four HD-BNC connectors for AES/EBU
audio input. Connect to these ports
when using AES/EBU audio and Dolby E
for input 4.
1/2, 3/4, 5/6, 7/8