Harris NEXIO AMP NX3801HDX, Руководство по установке оборудования и инструкция пользователя

Страница: 83 / 140

NEXIO AMP
Hardware Installation and User Guide
73
©2011 Harris Corporation. All rights reserved.
3 In the Channel Configuration area, set the options described below:
Resolution

In the Resolution area, select the desired resolution for the channel
configuration (i.e., SD, HD 1080i, HD 720p, and HD 1080p). On a server
configured for SD-only, HD 1080i, HD 720p, and HD 1080p options are
not available.
Play Format and ARC
a Click the appropriate Play Aspect option, and then in the Default
Channel ARC list select the ARC play format. For details on selecting the
Play Aspect and Default Channel ARC see the appropriate section below:
SD 16:9 Aspect Ratio Output
For channels configured to play out SD media, it is important to
identify the aspect ratio of the video output. If a channel is intended to
display a 16:9 aspect ratio, click the 16:9 option, and then select the
desired ARC setting. The selected ARC setting becomes the default
ARC setting for any SD 4:3 clips (that do not have pre-defined ARC
settings) loaded into that channel.
The available settings for a SD channel configured for a 16:9 aspect
ratio are:

Default — Uses the Pillar Box option to display the clip.

Anamorphic — Stretches the clip in the horizontal dimension to
fit the 16:9 frame.

Pillar Box — Adds black bars on each side of the clip to fit the
16:9 frame.

Middle Cut — Enlarges the clip on four sides to fit the 16:9
frame.

14:9 HD — Changes the aspect ratio of the clip to 14:9.

21:9 HD — Changes the aspect ratio of the clip to 21:9.
SD 4:3 Aspect Ratio Output
If a channel is intended to display a 4:3 aspect ratio, click the 4:3
option, and then select the desired ARC setting. The selected ARC
setting becomes the default ARC setting for any SD 16:9 clips (that do
not have pre-defined ARC settings) loaded into that channel.
The available settings for an SD channel configured for a 4:3 aspect
ratio are: