Harris NEXIO AMP NX3801HDX, Руководство по установке оборудования и инструкция пользователя

Страница: 91 / 140

NEXIO AMP
Hardware Installation and User Guide
81
©2011 Harris Corporation. All rights reserved.
6 In the Record Latency parameter defines the time in fields between when the
NEXIO receives the record command and actually initiates the record. This value
should only be changed to match an automation controller whose latency is
greater than 6 fields. The minimum value is 6.
7 In the Clock Source list, select one of the following:

COM1 or COM2 — to sync the internal clock and Harris applications to an LTC
TCC.

SYSTEM — to lock the Harris applications to the Windows 7 system clock.
The Auto Stop option is for Internal Use Only .
To specify VDCP parameters
1 Select the Disk Preroll Mode check box to enable disk preroll. The amount of the
preroll specified by the VDCP controller is added to any existing timecode offsets
established for the channel.
2 Select the Jog Smooth check box to enable jog smooth. If the jump threshold is
exceeded then VDCP Jog command performs a jump without a scrub, otherwise it
performs a smooth jog with scrub.

In the Jump Threshold list, select one of the following:

0 — to translate to CX.01/CX.02. This is the default.

1 — to translate to C1.00/C4.00.
3 Select the Port Mode check box to enable a more flexible interpretation of the
VDCP protocol. Specifically it enables VDCP controllers to send record commands
to a play port and play commands to a record port.
4 Select the Stop On Next check box to enable this feature. During stacked
(back-to-back ID) playout, the play channel will stop when it reaches the end of the
current ID as long as no play command has been sent to play the stacked clip.
5 Select the Unload Record Complete check box to enable automatic
record-channel unloading of completed recordings.
6 In the Play Latency list, enter the field value that you want between the receipt of
a play-command and the time the first frame of video plays. The minimum value
is 12.
Stack Stop Late is not an available option.